Wuxi ShiLong Steel Co.,Ltd.
1.Rich steel knowledge, excellent team, professional service. 2.Start with quality, destination will be excellence.
Add to Cart
Stainless steel 304/304L Grade:
Type 304/304L is the modern version of "18-8" stainless steel containing approximately 18% chromium and 8% nickel and is the most commonly specified stainless steel used throughout the world. Type 304/304L is a versatile, general purpose stainless steel with good resistance to atmospheric corrosion, and to many chemicals and food and beverages. These grades can be specified in the annealed condition where they have very good formability. Higher nickel versions can be specified to enhance multi-stage deep drawing characteristics. Higher strength, cold-worked conditions can also be specified for Type 304/304L for spring type applications. Type 304/304L is non-magnetic in the annealed condition but may become slightly magnetic as a result of cold working.
Type 304L can be dual certified as 304 when the composition meets the lower carbon limit of 304L and the slightly higher strength levels of 304. Type 304L should be specified for welded applications as the low carbon version eliminates chromium carbide precipitation and enhances the corrosion resistance in the as-welded condition.
| Item | Description |
| Product | AISI 304 316L 310S 316Ti 317L 430 Stainless Steel Plate / Sheet |
| Standard | ASTM A240 304 / AISI304 / SUS304 / DIN1.4301 / GB 0Cr18Ni9 |
| Grade | 201/202/S31803/S32205/904L |
| 304/304L/304H/309S/310S/316L/316Ti/317L/321 | |
| 409L/410S/420J1/J2/430 439 441 444 446 | |
| Thickness | 0.3-6.0mm for cold sheet scope; 3.0-100mm for hot rolled scope |
| Width&Length | 1000mm/1219mm/1500mm/1800mm/2000mm |
| Length from cutting, as requirement | |
| Surface | Mill surface: 2B/BA/No.1 |
| Processing surface: 8k mirror/Hairline/No.4 Satin/Bead blast/Color etched | |
| Protection | Transparent film/ Blue fulm/PVC film or laser film |
| Package | Standard export package with metal pallet + angle bar protection + |
| Processing | Edging/Laser(Plasma/Water Jet) cutting/Leveling/Slitting |
| Finish | Thickness | Characteristics | Applications |
| No. 1 | 3.0mm~60.0mm | Finished by hot-rolling, annealing and pickling, characterized by white pickled surface | Chemical industry equipment, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface | General Application Medical Instruments,Tableware |
| No. BA (Bright Annealed) | 0.3mm~2.0mm | Bright heat treatment after cold rolling | Kitchen utensil, kitchen ware,architectural purpose |
| No. 4 | 0.3mm~6.0mm | Polishing with No. 150 to No.180 mesh abrasivesThe most popular finishes | Milk & Food processing acilities, Hospital Equipment, Bath-tub |
| No. 8 | 0.5mm~6.0mm | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration forbuilding |
| HL(Hair Line) | 0.4mm~6.0mm | Finished by continuous linear polishing | Architectural purposes, escalators, kitchen ware vehicles |
| Chemical elemente contents% | |||||||||
| C | Si | Mn | P | S | Cr | Ti | Ni | Mo | N |
| 0.02 | 0.47 | 1.15 | 0.031 | 0.001 | 16.04 | 0.2 | 10.05 | 2.00 | 0.014 |
| Physical Properties | ||||
| Yield Strength | Tensile Strength | Elongation | HARDNESS | |
| Rp0.2 | Rm | A50 | HRB | |
| Mpa | Mpa | % | 1 | 2 |
| 245 | 564 | 70 | 77 | 79 |
