Wuxi ShiLong Steel Co.,Ltd.
1.Rich steel knowledge, excellent team, professional service. 2.Start with quality, destination will be excellence.
Add to Cart
| Duplex plates/sheets |
| Standard details: |
| Duplex UNS S31803/UNS S32205, Duplex F51, Duplex SA182 Grade F-51, DIN 1.4462 |
| Duplex A182-F51, Duplex SA182 Grade F-51 UNS S31803, UNS S32205, Din-1.4462 |
| Duplex ASTM A182 Grade F60 / ASME SA182 Grade F60 NACE & Norsok Approved |
| Super Duplex 2507, Super Duplex SAF2507 Super Duplex SAF 2507 ASTM A182 Grade F53 |
| Super Duplex F53, Super Duplex SA182 Grade F-53, Super Duplex S32750 |
| Super Duplex UNS S32760 F55 ASTM A182 F-55 SA182 F55 DIN 1.4501 UNS 32760 |
| ASTM / ASME SB 163 UNS 2200 ( NICKEL 200 ) |
| ASTM / ASME SB 163 UNS 2201 (NICKEL 201 ) |
| ASTM / ASME SB 163 / 165 UNS 4400 (MONEL 400 ) |
| ASTM / ASME SB 464 UNS 8020 ( ALLOY 20 / 20 CB 3 ) |
| ASTM / ASME SB 704/705 UNS 8825 INCONEL (825) |
| ASTM / ASME SB 167 / 517 UNS 6600 (INCONEL 600 ) |
| ASTM / ASME SB 167 UNS 6601 ( INCONEL 601 ) |
| ASTM / ASME SB 704 /705 UNS 6625 (INCONEL 625) |
| ASTM / ASME SB 619/622/626 UNS 10276 ( HASTELLOY C 276 ) |
| Copper Alloy |
| ASTM / ASME SB 111 UNS NO. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500. |
| ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10), C 71500 ( CU -NI- 70/30) |
| Characteristics and application | |
| 2B | The surface brightness and flatness of 2B is better than 2D.then through a special surface treatment to improve its mechanical properties.2B could nearly satisfy comprehensive uses. |
| NO.3 | Polished with abrasive belt of git#100#200,have better brightness with discontinuous coarse stria,used as inner and external ornaments for building,electrical appliances and kitchen utensils etc. |
| NO.4 | Polished with abrasive belt of grit#150#180.have better brightness with discontinuous coarse stria.but thinner than NO.3,are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL | Polished with abrasive belt of grit#150#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
| BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
| 8K | The product have excellent brightness and prefer reflexivity can be the mirror. |
| Mechanical properties | |||||||
| | Heat Treatment | Yield strength(N/mm2) | Tensile strength | Elongation (%) | Hardness | ||
| 363 | |||||||
| 2507 | S | ≥550 | ≥965 | ≥30 | |||
| | Sizes | | Standard Tolerances | ||||
| Products | OD | Wall | Lengths and /or coils | Grades | OD | Wall | Lengths |
| Pressure & Corrosion Tubing Meets or exceeds requirements forwelded Specification: ASTM-A789 | 1/16" (1.59 mm) to 4" (101.6 mm) Metric sizes available | 0.010" (0.25 mm) to 0.220" (5.59 mm) | Random or cut lengths up to 40' (12.2 m) Coils to 1-1/2" OD | Super Duplex 2507 | <1-1/2" (38.1 mm) ±0.005" (0.13 mm) 1-1/2" (38.1 mm) to 3" (76.2 mm) ±0.010" (0.25 mm) 3-1/2" (88.9 mm) to 4" (101.6 mm) ±0.015" (0.38 mm) | ±10% | Randoms up to +2" (50.8 mm) Cuts +1/8" (3 mm) -0" Coils to 80,000' (24,384 m) |
| Subsea Umbilical Tubing Specifications: ASTM-A789 and ASTM-A790 | 3/8" (9.53 mm) to 1-1/2" (38.1 mm) | 0.039" (0.99 mm) to 0.125" (3.18 mm) | Cut lengths to 60' (18.3 m) Coils to 1-1/2" OD* | Super Duplex 2507 | ±0.005" (0.127 mm) | ±10% | Coils to 80,000' |
